Investigation of hypersonic nozzle flow uniformity using NO fluorescence

Planar laser-induced fluorescence visualisation is used to investigate nonuniformities in the flow of a hypersonic conical nozzle. Possible causes for the nonuniformity are outlined and investigated, and the problem is shown to be due to a small step at the nozzle throat. Entrainment of cold boundary layer gas is postulated as the cause of the signal nonuniformity. PACS 47.80.Jk, 47.40.Ki, 47.60.+i     

多层绝热材料规模化干燥处理时温度场的测试与分析

对大批量处理多层绝热材料的大型专用干燥箱满负荷运行时工作区域的温度场进行测试,通过温度分布和温度场均匀性的分析,得出了最高温度发生点的位置与成因以及影响温度场均匀性的主要因素,并对温度的控制方法、多层材料的布置方案和干燥设备的改进提出了建议。     

空间目标红外辐射特性研究

利用目标的红外光谱特性进行目标探测和识别是一种有效的方法。以空间卫星为目标,研究了其红外辐射特性形成的机理;利用所建立的数学模型,仿真了空间目标在探测面上所形成的红外光谱特性曲线;分析了模型中各参数对目标光谱特性的影响程度和卫星目标的红外光谱曲线。     

Tail probabilities of the limiting null distributions of the Anderson–Stephens statistics

For the purpose of testing the spherical uniformity based on i.i.d. directional data (unit vectors) z_i, i=1,…,n, Anderson and Stephens (Biometrika 59 (1972) 613–621) proposed testing procedures based on the statistics S_max=max_u S(u) and S_min=min_u S(u), where u is a unit vector and nS(u) is the sum of squares of u′z_i's. In this paper, we also consider another test statistic S_range=S_max−S_min. We provide formulas for the P-values of S_max, S_min, S_range by approximating tail probabilities of the limiting null distributions by means of the tube method, an integral-geometric approach for evaluating tail probability of the maximum of a Gaussian random field. Monte Carlo simulations for examining the accuracy of the approximation and for the power comparison of the statistics are given.     

关于折射率对散射光场分布影响的研究

根据Mie散射理论,采用理论计算和实验相结合的手法,研究了光散射现象以及散射介质的折射率对散射光场分布的影响.通过对空气中不同折射率的散射介质形成的散射光场光强的实验比较,论证了散射介质折射率的实部变化对散射光强的影响不大,其主要影响是通过对相位的变化来实现的,也即散射介质折射率的虚部变化对光强的影响很大,在实际应用中不可忽略.这一结论对以散射光场的分布为基础的各种研究具有一定的指导意义.     

工业CT图像均匀性校正

在工业CT图像重建过程中,射束硬化使得图像出现“杯状”伪影,阵列探测器响应不一致使得图像出现环状伪影、带状伪影和点伪影,影响图像均匀性.本文分析了射束硬化的原理和探测器响应不一致的数学模型,并通过实验,对探测器响应进行多挡板定标得到校正系数表.利用查表插值的方法对投影数据进行均匀性校正,消除上述伪影.     

实现均匀照度光伏聚光镜设计

为满足聚光光伏系统的聚光需求,解决传统点聚焦式聚光光伏系统中聚焦光斑不均匀、径长比过大和聚光比较小的缺点,在不增加二次匀光器件的前提下,设计了径长比小、聚焦光斑相对均匀、聚光比高的聚光光伏系统。根据几何光学柯勒照明原理、等光程原理和反射定律,通过数值求解等光程方程组获得聚光镜各个面型的轮廓曲线。利用TracePro软件对所设计的聚光系统进行光线追迹模拟,结果表明:在聚光比为725的情况下,聚焦光斑最大照度仅为太阳照度的2300倍,是点聚焦情况下的1/10左右,系统的径长比为0.3,接收角为0.72°。系统设计实现了结构紧凑,聚光性能高的设计目标,为高倍聚光光伏系统的小型化,简单化提供了一种有效的解决途径。     

Proposition of a compensated pixelwise calibration for photonic infrared cameras and comparison to classic calibration procedures: Case of thermoelastic stress analysis

In this paper, we propose a compensated pixelwise calibration that integrates the effects of the camera housing temperature. The results of this calibration are compared on black body images to classic two points Non Uniformity Correction based calibrations, compensated or not. It is shown that the proposed approach leads to a significant improvement in the thermal resolution with a reduction in the mean error as well as the standard deviation. The approach is finally challenged on a real case measurement focusing on thermoelasticity. The gain in terms of accuracy measurement is highlighted by comparing the proposed calibration to classic calibrations and the scope of interest of this new calibration is discussed.     

超高强度钢（35CrNi3Mo）化学成分标准物质研制

采用与超高强度钢,台炼过程相同的工艺制备了35CrNi3Mo化学成分标准物质。对标准物质的制备技术、均匀性检验、稳定性考察进行了分析。研制的35CrNi3Mo化学成分标准物质具有良好的均匀性和稳定性。采用8家实验室进行协作定值,对定值结果的不确定度进行评定,各组分定值结果的相对扩展不确定度小于13％。     

Experimental research of effects of different rotation radii on the growth rate of potassium dihydrogen phosphate crystals

Comparing with the traditional concentric rotation method (rotation radius is 0 cm), the effects of different rotation radii on the growth rate of KDP crystals were studied by experimental methods. It was found that with the increase of rotation radius from 0 cm, the growth rate of each direction of crystals first increased and then decreased in a size‐unchanged vessel. The smaller the distance between the crystal and vessel wall, the less the growth rate. This phenomenon was named the “wall collision effect”. Also, the value of growth rate reached a maximum when the rotation radius was about half of its allowable largest value in the size‐unchanged vessel. In addition, an increase of the rotation radius could improve the crystal growth rate under the same linear velocity of crystal movement. Finally, the uniformity of crystal growth has also been analyzed compared with the concentric rotation radius. It was found that the uniformity of crystal growth was best when the rotation radius was half of its allowable maximum value, and it was more conducive to the actual application of KDP crystals.